:: Zobacz wątek - deus v4 co wiemy

BROMBA napisał(a):

Witam.
Panowie lub panie, ma ktoś jakieś info jak używać w 4.1 czułości gruntu ?

Zadałem pytanie na stronie XP.
Nie mam czasu tłumaczyć. Cytuję:

"Ground sensitivity
New menu addition “Ground Sensitivity” in GB > EXPERT.
This new setting makes it possible to adjust the machine's ability to track soils according to their intensity. This makes it possible to avoid tracking on soils with a low mineralisation.

GROUND SENS low (1 to 5):
Slightly mineralized soils are ignored and the DEUS does not track and will not display ground values, the Deus will default to the recommended level.
GROUND SENS high (6 to 10):
The DEUS will track even low mineralized soils.

Note: Do not be tempted to adjust the “GROUND SENS” too high as this may introduce more instability and false ground readings. Levels of 1 to 5 are recommended, they will give you better stability over the V4.0.

Ground Display and Ground Tracking:
Ground measurement display:
If the DEUS does not register a ground effect for 7 seconds or receives a level lower than the set “GROUND SENS” for more than 7 seconds it will now display – –
Ground Tracking: If the DEUS no longer measures a suitable ground effect for 30 seconds it will default the tracking to a setting value of 88 for more stability.

For example the ground value will revert to default if: The soil is not mineralized enough or if the level of mineralization is lower than your set “GROUND SENS”, or simply if you stop detecting.

As soon as you resume detecting or if the soil becomes sufficiently mineralized again, the DEUS will continue to track the soil and the display will show the measured value.

Note: HF disks do not require software updates for the moment, they are ignored during the update."

Autor:	Antonior [ niedziela, 17 grudnia 2017, 00:04 ]
Tytuł:	Re: deus v4 co wiemy
Te egoisci a ja to co? Znam jedna samice co też nie poddaje się więc gatunek przetrwa :lol:

Autor:	zeppo035 [ niedziela, 17 grudnia 2017, 01:14 ]
Tytuł:	Re: deus v4 co wiemy
to gratulacje i do roboty :jump :zdr

Autor:	xawi29 [ niedziela, 31 grudnia 2017, 07:20 ]
Tytuł:	Re: deus v4 co wiemy
Witam. Po nowym roku na stronie XP ma byc oficialnie dostepne nowe oprogramowanie wersja 4.1, wszystkie nowe detektory tez juz maja to opragramowanie. Tu oficialne info od XP: "Dear XP Customers, Please note that from last week we started to deliver the DEUS with version 4.1 installed and will continue after our Christmas holidays. The Deus version 4.1 update will be available to download from XP website at the beginning of January only. Don’t hesitate to contact Nigel or Marcus at Regton, Gary Blackwell or any of the XP authorised dealers if you need further technical explanation about the 4.1. (UK) All at XP would like to wish you a happy and exciting 2018!

Autor:	yarek [ niedziela, 31 grudnia 2017, 09:38 ]
Tytuł:	Re: deus v4 co wiemy
Czyli na wakacje będzie

Autor:	Antonior [ niedziela, 31 grudnia 2017, 12:15 ]
Tytuł:	Re: deus v4 co wiemy
Ta 2019 połowa czerwca :lol:

https://poszukiwanieskarbow.com/forum/

deus v4 co wiemy https://poszukiwanieskarbow.com/forum/viewtopic.php?f=147&t=161530	Strona 95 z 105

Autor:	zeppo035 [ niedziela, 31 grudnia 2017, 18:59 ]
Tytuł:	Re: deus v4 co wiemy
nie ma biedy 4.1 beta 2 też daje radę :666 wszystkiego najlepszego w nowym roku i unikania :cop :cop :cop :bir :bir :bir :zdr :pa

Autor:	Imatra [ piątek, 12 stycznia 2018, 20:03 ]
Tytuł:	Re: deus v4 co wiemy
Oficjalne 4.1 na stronie XP już jest.

Autor:	wclan [ piątek, 12 stycznia 2018, 21:06 ]
Tytuł:	Re: deus v4 co wiemy
Aktualizuje wam cewke HF czy tylko sam panel ? Edit: na 4.0 tego nie bylo (na betach 4.1 nie sprawdzalem), ale pojawila sie nowa opcja obok Notcha Gruntu jest .. nie wiem ... czulosc gruntu ?

Autor:	yarek [ piątek, 12 stycznia 2018, 21:33 ]
Tytuł:	Re: deus v4 co wiemy
Białych nie aktualizuje. Tylko panel i wski

Autor:	zeppo035 [ sobota, 13 stycznia 2018, 10:15 ]
Tytuł:	Re: deus v4 co wiemy
od tego ustawienia zależy jak szybko wykrywacz reaguje na zmiany mineralizacji im wyżej tym szybciej nie wiem tylko jak to stosować i poco spowalniać reakcję wykrywacza na grunt :? opcja dostępna była w 4.1 beta 2

Autor:	BROMBA [ niedziela, 14 stycznia 2018, 12:48 ]
Tytuł:	Re: deus v4 co wiemy
Witam. Panowie lub panie, ma ktoś jakieś info jak używać w 4.1 czułości gruntu ?

Autor:	Perunio [ poniedziałek, 15 stycznia 2018, 12:43 ]
Tytuł:	Re: deus v4 co wiemy
Ktoś robił testy oficjalnej 4.1?

Autor:	malik79 [ środa, 17 stycznia 2018, 12:44 ]
Tytuł:	Re: deus v4 co wiemy
[quote="BROMBA"]Witam. Panowie lub panie, ma ktoś jakieś info jak używać w 4.1 czułości gruntu ?[/quote] Zadałem pytanie na stronie XP. Nie mam czasu tłumaczyć. Cytuję: "Ground sensitivity New menu addition “Ground Sensitivity” in GB > EXPERT. This new setting makes it possible to adjust the machine's ability to track soils according to their intensity. This makes it possible to avoid tracking on soils with a low mineralisation. GROUND SENS low (1 to 5): Slightly mineralized soils are ignored and the DEUS does not track and will not display ground values, the Deus will default to the recommended level. GROUND SENS high (6 to 10): The DEUS will track even low mineralized soils. Note: Do not be tempted to adjust the “GROUND SENS” too high as this may introduce more instability and false ground readings. Levels of 1 to 5 are recommended, they will give you better stability over the V4.0. Ground Display and Ground Tracking: Ground measurement display: If the DEUS does not register a ground effect for 7 seconds or receives a level lower than the set “GROUND SENS” for more than 7 seconds it will now display – – Ground Tracking: If the DEUS no longer measures a suitable ground effect for 30 seconds it will default the tracking to a setting value of 88 for more stability. For example the ground value will revert to default if: The soil is not mineralized enough or if the level of mineralization is lower than your set “GROUND SENS”, or simply if you stop detecting. As soon as you resume detecting or if the soil becomes sufficiently mineralized again, the DEUS will continue to track the soil and the display will show the measured value. Note: HF disks do not require software updates for the moment, they are ignored during the update."

Autor:	Kryhu [ czwartek, 18 stycznia 2018, 10:33 ]
Tytuł:	Re: deus v4 co wiemy
Koledzy podpowiedzcie proszę czy problem "głośnej elektroniki" z v4.0 przy korzystaniu z WS4 w zestawie bez panela został usunięty w v4.1?

Strona 95 z 105	Strefa czasowa: UTC + 1 [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Autor:	dennissliwa [ sobota, 20 stycznia 2018, 19:26 ]
Tytuł:	Re: deus v4 co wiemy
malik79 napisał(a): BROMBA napisał(a): Witam. Panowie lub panie, ma ktoś jakieś info jak używać w 4.1 czułości gruntu ? Zadałem pytanie na stronie XP. Nie mam czasu tłumaczyć. Cytuję: "Ground sensitivity New menu addition “Ground Sensitivity” in GB > EXPERT. This new setting makes it possible to adjust the machine's ability to track soils according to their intensity. This makes it possible to avoid tracking on soils with a low mineralisation. GROUND SENS low (1 to 5): Slightly mineralized soils are ignored and the DEUS does not track and will not display ground values, the Deus will default to the recommended level. GROUND SENS high (6 to 10): The DEUS will track even low mineralized soils. Note: Do not be tempted to adjust the “GROUND SENS” too high as this may introduce more instability and false ground readings. Levels of 1 to 5 are recommended, they will give you better stability over the V4.0. Ground Display and Ground Tracking: Ground measurement display: If the DEUS does not register a ground effect for 7 seconds or receives a level lower than the set “GROUND SENS” for more than 7 seconds it will now display – – Ground Tracking: If the DEUS no longer measures a suitable ground effect for 30 seconds it will default the tracking to a setting value of 88 for more stability. For example the ground value will revert to default if: The soil is not mineralized enough or if the level of mineralization is lower than your set “GROUND SENS”, or simply if you stop detecting. As soon as you resume detecting or if the soil becomes sufficiently mineralized again, the DEUS will continue to track the soil and the display will show the measured value. Note: HF disks do not require software updates for the moment, they are ignored during the update."