Kryhu napisał(a):
Dzięki EL NINO :)
Czyli z jednej strony piszą że oba mają tą samą technologię ale już na diagramie poniżej z opisem Multi IQ widać, że w tym trybie 600'tka nie dysponuje informacją z 20 - 40 kHz:
Załącznik:
Multi_600.png
Z tym, że ten diagram (wg. mnie) można czytać również tak, że tryb multi jest taki sam w obu detektorach, a możliwość korzystania z pojedyńczych częstotliwości jest w 600-ce ograniczona do 3.
Tym bardziej, że na stronie Minelaba jest informacja, że :
„Most of the confusion I have seen online revolves around Minelab’s new Multi-IQ simultaneous multi-frequency technology and the frequencies employed by the two detectors. The EQUINOX 600 is limited to 5 kHz, 10 kHz, and 15 kHz single frequencies, while the EQUINOX 800 also offers these plus the additional higher frequencies of 20 kHz and 40 kHz. This does not mean that the 600 is not employing the full multi-frequency range as part of the Multi-IQ processing. Multi-frequency operation is identical in the two models and provides the same maximum signal response to targets in Park, Field and Beach Detect Modes., The real magic of EQUINOX is in the Multi-IQ technology (not the single frequencies), therefore you can rest assured the EQUINOX 600 matches the EQUINOX 800 in this regard”
W skrócie - tryb multi jest identyczny w obu modelach...